This frameless shower door is the traditional style. It uses surface to glass clips with no metal on the top edge. It does have a 90 degree sleeve at the top corner.
Traditional Style Oil Rubbed Bronze
This is a shower we designed and built that uses the traditional style with oil rubbed bronze hardware.
Frameless Shower Door with Header
This frameless shower door has a header. The header is the piece of metal that runs along the top edge. The header was necessary for this frameless shower because the door needed to be set between 2 side panels of glass.
Frameless Shower Door on Tub
We set this frameless shower door on top of a cast iron tub. It turned out great.
Frameless Shower with Seat and Half Wall
This shower has two steps on the back edge of the sidelite. One for the seat and one for the half wall. It was a large shower that turned out beautifully.
Frameless Shower / Door Set in the Middle
This frameless shower enclosure needed the door set in the middle of two side panels. It is nearly nine feet wide and was custom designed for a 850k townhouse in Nashville, but we do showers of all sizes for all types of homes.
Frameless Shower with U-Channel and No Header
This is a frameless shower that uses a u-channel track at the bottom edge and clips at the top edge.
Custom Angle Frameless Shower
This shower presented a challenge because of the unique angles it needed to cover. The bulkhead had two unique angles, but because the Allnite Glass Co. is experienced and works with highly skilled glass fabricators, the shower turned out beautifully.
Frameless Shower Door with Sidelite
This is a traditional style frameless shower door that uses a small panel of glass to make a sidelite next to the door.
Frameless Shower / Neo Angle
This three panel shower is known as a neo angle shower. The angles are approximately 135 degrees.
Heavy Glass Shower Sheild
This is a 3/8" thick glass shower shield. It was designed with black u-channel around the edges at the buyer's request.