Shower Door Glass Repair
Is the glass broken in your shower door? We can replace the broken piece of glass with a new one. Call or email:
Office Phone: 931-645-2464
Email quote requests to: Contact@AllniteGlass.com
Shower door Glass We repair
This frameless shower door is the traditional style. It uses surface to glass clips with no metal on the top edge. It does have a 90 degree sleeve at the top corner.
This is a shower we designed and built that uses the traditional style with oil rubbed bronze hardware.
This frameless shower door has a header. The header is the piece of metal that runs along the top edge. The header was necessary for this frameless shower because it is 8 feet tall and 6 1/2 feet wide. Without the header, the glass may not have have set correctly. This shower also has mitered corners so that the glass butts up together at the corners to make a perfect 90 degree turn.
We set this frameless shower door on top of a cast iron tub. It turned out great.
This shower has two steps on the back edge of the sidelite. One for the seat and one for the half wall. It was a large shower that turned out beautifully.
This frameless shower enclosure needed the door set in the middle of two side panels because the bottom of the walls in the shower were tapered in.
This shower presented a challenge because of the unique angles it needed to cover. The bulkhead had two unique angles, but because the Allnite Glass Co. is experienced and works with highly skilled glass fabricators, the shower turned out beautifully.
This is a traditional style frameless shower door that uses a small panel of glass to make a sidelite next to the door.
This is a duplicate shower of the ladder. They were both installed into side by side condominiums. This one uses oil rubbed bronze hardware.
This three panel shower is known as a neo angle shower. The angles are approximately 135 degrees.
- Clear Shower Door Glass
- Patterned Shower Door Glass
- Framed Shower Door Glass
- Frameless Shower Door Glass